Aerial map
You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Start new report here Reposition report here
Back to all reports

Overgrown bushes

Reported via mobile in the Restricted Visibility / Overgrown / Overhanging category anonymously at 17:39, Wed 15 May 2024

Sent to Northumberland County Council less than a minute later. FixMyStreet ref: 5978604.

Photo of this report zoom
Photo of this report zoom
Photo of this report zoom

Last year we had a new fence put up at the back of our garden. On the back of our fence there is overgrown bushes with nettles, thorns and ivy. As it’s overgrown it is now starting to climb my fence and come through to my side of the garden it is too thick for me to access it from the other side so I’m requesting that you could cut it back. My previous fence was covered in ivy and I do not wish for this fence to be the same

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank You for your report. We will review this report at our earliest opportunity.

    Posted by Northumberland County Council at 17:39, Wed 15 May 2024

  • Still open, via questionnaire, 18:16, Wed 12 June 2024

  • Still open, via questionnaire, 18:32, Wed 10 July 2024

  • Still open, via questionnaire, 19:04, Wed 7 August 2024

  • Still open, via questionnaire, 21:23, Wed 4 September 2024

  • Still open, via questionnaire, 21:33, Wed 2 October 2024

  • This report has now been closed. All necessary actions have been taken to resolve this issue. Thank you on behalf of Northumberland County Council.

    State changed to: Fixed

    Posted by Northumberland County Council at 16:48, Fri 4 October 2024

  • Still open, via questionnaire, 22:09, Wed 30 October 2024

  • State changed to: Investigating

    Updated by Northumberland County Council at 08:50, Fri 13 December 2024

Only the original reporter may leave updates. If you made the original report please log in to leave an update.